Ooberpad announces the availability of the power-packed Jeff Rowland Model 125 Stereo Power Amplifier. The Jeff Rowland Model 125 stereo bridgeable power amplifier packs a hefty punch with dynamic realism and refinement from its solid aircraft-grade aluminum chassis, an ideal match for the sleek profile of its companion Capri S2 preamplifier. From a single M125 in stereo mode powering an intimate analog system, up to several bridged units driving a multi-speaker setup, down to a bridged pair controlling demanding 4-Ohm monitors, the energy-efficient Model 125 power amplifier delivers consistent resolution and authority with Rowland finesse.
Warranty
1-year manufacturer's warranty
Key Features:
Machined Aluminum Chassis
Balanced Topology
High-Precision Surface Mount Components
Teflon Coated Wires
Transformer Coupling & Isolation
Parallel Binding Posts
Flexible 15 Amp AC Power
Benefits of Jeff Rowland Model 125 Stereo Power Amplifier:
Machined Aluminim Chassis
Precision-machined from a solid block of aircraft grade 6061-T6 aluminum, provides exceptional thermal heat transfer/dissipation, RFI/EMI shielding, and resonance control.
Balanced Topology
Inherent cancellation effects of balanced topology implemented throughout all power and input/output circuits ensures greatly reduced distortion and noise under dynamic signal conditions.
Teflon Coated Wires
All signal carrying input and output wires are teflon coated, also for low dielectric energy storage, further ensuring that each audio note reproduced naturally decays into the deeper silence of the music.
High Precision Surface Mount Components
Extensive use of Lead (Pb)-free, low temperature coefficient, active and passive surface-mount components results in significantly smaller loop areas, reduced circuit capacitance and inductance, and introduces less noise than conventional leaded components.
Transformer-Coupling and Isolation
Transformer coupled input circuitry provides universal component compatibility and virtually eliminate ground loop noise and RFI/ EMI. Transformer coupling ensures identical amplifier overall gain when using unbalanced input adapters.
High-Efficiency Switch-Mode Power Supply
Highly efficient, compact, light weight, switch-mode power supply provides optimum voltage regulation for all circuits and operating conditions, and allows for quiet operation over a wide range of AC mains power sources.
Parallel Binding Posts
CE approved speaker output terminals require no tools for secure, low resistance connections, and allow for easy bi-wiring applications.
Flexible 15 Amp AC Power
15 Amp AC power inlet accepts a wide variety of after-market high-performance power cables.
Front Panel Standby Button / Rear Panel Remote Jack
Illuminated front panel push-button switches the amplifier into standby mode (< 1 watt consumption). 12V 3.5mm jack on rear panel permits amplifier power on/standby switching in remote and home theater applications.
Where to buy? Buy Jeff Rowland Model 125 Stereo Power Amplifier online at the best price in Mumbai, Delhi, Bangalore, Chennai and all across India. Enjoy expert, prompt and courteous customer service from the Ooberpad team. We will help you choose better and give you all the support you need to take the right buying decision in India.
Technical Specifications of Jeff Rowland Model 125 Stereo Power Amplifier:
Brand & Model #
Jeff Rowland Model 125
Output Power
125 watts @ 8 ohms / 250 watts @ 4 ohms
Output Power (Bridge-tied Load)
500 watts @ 8 ohms BTL
Frequency Response
5 Hz – 130 kHz, -3dB
Input Impedance
40k ohms
THD + Noise
< 0.008% @ 1kHz
Damping Factor
> 500, @ 1kHz
Overall Gain
26
Amplifier Weight
7.8 lbs. / 3.5 kg
Overall Amplifier Dimensions (h/w/d)
2.7” x 13.7” x 7.5” / 68mm x 348mm x 190mm
PN: All Pre-order/On-Order/Special-Color takes minimum 4-6 weeks to arrange from brand. Please speak with Customer Support Representative incase of any queries.
Description
Ooberpad announces the availability of the power-packed Jeff Rowland Model 125 Stereo Power Amplifier. The Jeff Rowland Model 125 stereo bridgeable power amplifier packs a hefty punch with dynamic realism and refinement from its solid aircraft-grade aluminum chassis, an ideal match for the sleek profile of its companion Capri S2 preamplifier. From a single M125 in stereo mode powering an intimate analog system, up to several bridged units driving a multi-speaker setup, down to a bridged pair controlling demanding 4-Ohm monitors, the energy-efficient Model 125 power amplifier delivers consistent resolution and authority with Rowland finesse.
Warranty
1-year manufacturer's warranty
Key Features:
Machined Aluminum Chassis
Balanced Topology
High-Precision Surface Mount Components
Teflon Coated Wires
Transformer Coupling & Isolation
Parallel Binding Posts
Flexible 15 Amp AC Power
Benefits of Jeff Rowland Model 125 Stereo Power Amplifier:
Machined Aluminim Chassis
Precision-machined from a solid block of aircraft grade 6061-T6 aluminum, provides exceptional thermal heat transfer/dissipation, RFI/EMI shielding, and resonance control.
Balanced Topology
Inherent cancellation effects of balanced topology implemented throughout all power and input/output circuits ensures greatly reduced distortion and noise under dynamic signal conditions.
Teflon Coated Wires
All signal carrying input and output wires are teflon coated, also for low dielectric energy storage, further ensuring that each audio note reproduced naturally decays into the deeper silence of the music.
High Precision Surface Mount Components
Extensive use of Lead (Pb)-free, low temperature coefficient, active and passive surface-mount components results in significantly smaller loop areas, reduced circuit capacitance and inductance, and introduces less noise than conventional leaded components.
Transformer-Coupling and Isolation
Transformer coupled input circuitry provides universal component compatibility and virtually eliminate ground loop noise and RFI/ EMI. Transformer coupling ensures identical amplifier overall gain when using unbalanced input adapters.
High-Efficiency Switch-Mode Power Supply
Highly efficient, compact, light weight, switch-mode power supply provides optimum voltage regulation for all circuits and operating conditions, and allows for quiet operation over a wide range of AC mains power sources.
Parallel Binding Posts
CE approved speaker output terminals require no tools for secure, low resistance connections, and allow for easy bi-wiring applications.
Flexible 15 Amp AC Power
15 Amp AC power inlet accepts a wide variety of after-market high-performance power cables.
Front Panel Standby Button / Rear Panel Remote Jack
Illuminated front panel push-button switches the amplifier into standby mode (< 1 watt consumption). 12V 3.5mm jack on rear panel permits amplifier power on/standby switching in remote and home theater applications.
Where to buy? Buy Jeff Rowland Model 125 Stereo Power Amplifier online at the best price in Mumbai, Delhi, Bangalore, Chennai and all across India. Enjoy expert, prompt and courteous customer service from the Ooberpad team. We will help you choose better and give you all the support you need to take the right buying decision in India.
Technical Specifications of Jeff Rowland Model 125 Stereo Power Amplifier:
Brand & Model #
Jeff Rowland Model 125
Output Power
125 watts @ 8 ohms / 250 watts @ 4 ohms
Output Power (Bridge-tied Load)
500 watts @ 8 ohms BTL
Frequency Response
5 Hz – 130 kHz, -3dB
Input Impedance
40k ohms
THD + Noise
< 0.008% @ 1kHz
Damping Factor
> 500, @ 1kHz
Overall Gain
26
Amplifier Weight
7.8 lbs. / 3.5 kg
Overall Amplifier Dimensions (h/w/d)
2.7” x 13.7” x 7.5” / 68mm x 348mm x 190mm
PN: All Pre-order/On-Order/Special-Color takes minimum 4-6 weeks to arrange from brand. Please speak with Customer Support Representative incase of any queries.
